Heading 7317: Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper
In chapter 73, Articles of iron or steel. 6 rate lines, laid out as HTS Revision 20 (2026) prints them.
| HTS number | Description | Units | General | Special | Column 2 |
|---|---|---|---|---|---|
| 7317.00 | Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper: | ||||
| 7317.00.10.00 | Thumb tacks | kg | Free | 4% | |
| Other, suitable for use in powder-actuated handtools: | |||||
| 7317.00.20.00 | Not threaded | kg | Free | 1.5ยข/kg | |
| 7317.00.30.00 | Threaded | kg | Free | 45% | |
| Other: | |||||
| Of one piece construction: | |||||
| 7317.00.55 | Made of round wire | Free | 3.5% | ||
| Collated nails: | |||||
| 7317.00.55.01 | Collated roofing nails with a length of 20.6 mm to 46.1 mm, a head diameter of 8.3 mm to 10.6 mm, a shank diameter of 2.5 mm to 3.2 mm, whether or not galvanized | kg | |||
| Other: | |||||
| Assembled in a wire coil: | |||||
| 7317.00.55.02 | Galvanized | kg | |||
| 7317.00.55.03 | Other | kg | |||
| Assembled in a plastic strip: | |||||
| 7317.00.55.05 | Galvanized | kg | |||
| 7317.00.55.07 | Other | kg | |||
| 7317.00.55.08 | Assembled in a paper strip | kg | |||
| 7317.00.55.11 | Assembled in a wire strip | kg | |||
| 7317.00.55.18 | Other | kg | |||
| Other: | |||||
| 7317.00.55.19 | With a length of less than 25.4 mm and with a diameter of less than 1.65 mm | kg | |||
| Other: | |||||
| Smooth shank: | |||||
| 7317.00.55.20 | Not coated, plated or painted | kg | |||
| Coated, plated or painted: | |||||
| 7317.00.55.30 | Galvanized | kg | |||
| 7317.00.55.40 | Vinyl, resin or cement coated | kg | |||
| 7317.00.55.50 | Other | kg | |||
| Other: | |||||
| 7317.00.55.60 | Not coated, plated or painted | kg | |||
| Coated, plated or painted: | |||||
| 7317.00.55.70 | Galvanized | kg | |||
| 7317.00.55.80 | Vinyl, resin or cement coated | kg | |||
| 7317.00.55.90 | Other | kg | |||
| 7317.00.65 | Other | Free | 5.5% | ||
| 7317.00.65.30 | Cut | kg | |||
| 7317.00.65.60 | Other | kg | |||
| 7317.00.75.00 | Of two or more pieces | kg | Free | 8% |
Rates are quoted as printed. Each 8-digit number opens its own page with footnotes and cited chapter 99 headings.
Watch lines in heading 7317
Pick the 8 or 10 digit numbers you import and we email you the old and new text whenever a new HTS revision changes them.
See the alert plansNo line in this heading cites a chapter 99 heading in its footnotes or rate columns.
What this page leaves to your broker
This page quotes the schedule. It does not add the rates together, and it does not say whether a chapter 99 heading applies to a shipment: that turns on the country of origin, the dates and the U.S. notes to chapter 99. Section 301, Section 232 and other chapter 99 measures list the goods they cover in those notes and in Federal Register notices, so a line can be covered by a heading its footnotes never cite. A licensed customs broker makes the determination.
Built September 29, 2026 from HTS Revision 20 (2026) (USITC release 2026HTSRev20, published September 23, 2026, current since September 28, 2026). The schedule changes often; USITC's own site always has the current text.