9903.90.09 Articles the product of the Russian Federation, as provided for in U.S. note 30(c) to this subchapter and as provided for in the subheadings enumerated in U.S. note 30(d) to this subchapter
A heading in chapter 99 of the schedule, cited by 127 lines in chapters 1 to 97. How chapter 99 works, and which headings stopped applying in 2026.
9903.90.09 as printed in HTS Revision 20 (2026)
| Heading text | Articles the product of the Russian Federation, as provided for in U.S. note 30(c) to this subchapter and as provided for in the subheadings enumerated in U.S. note 30(d) to this subchapter |
|---|---|
| General rate (column 1) | none printed |
| Special rate (column 1) | none printed |
| Column 2 rate | 70% |
Footnotes
- See chapter 99 statistical note 1. (on the statistical suffix, units of quantity)
Lines that cite 9903.90.09
Where a line's footnote or rate column names this heading. The heading's U.S. note decides which goods and countries it covers; a citation alone does not.
| HTS number | Description | Cited in |
|---|---|---|
| 7201.10.00.00 | Nonalloy pig iron containing by weight 0.5 percent or less of phosphorus | footnote on the column 2 rate |
| 7202.11.50.00 | Containing by weight more than 4 percent of carbon | footnote on the column 2 rate |
| 7202.21.10.00 | Containing by weight more than 3 percent of calcium | footnote on the column 2 rate |
| 7202.29.00 | Ferrosilicon: other | footnote on the column 2 rate |
| 7202.30.00 | Ferrosilicon manganese | footnote on the column 2 rate |
| 7202.41.00.00 | Containing by weight more than 4 percent of carbon | footnote on the column 2 rate |
| 7202.49.10.00 | Containing by weight more than 3 percent of carbon | footnote on the column 2 rate |
| 7202.70.00.00 | Ferromolybdenum | footnote on the column 2 rate |
| 7202.92.00.00 | Ferroalloys: ferrovanadium | footnote on the column 2 rate |
| 7203.10.00.00 | Ferrous products obtained by direct reduction of iron ore | footnote on the column 2 rate |
| 7204.21.00.00 | Of stainless steel | footnote on the column 2 rate |
| 7204.29.00.00 | Waste and scrap of alloy steel: other | footnote on the column 2 rate |
| 7204.49.00 | Ferrous waste and scrap; remelting scrap ingots of iron or steel: other | footnote on the column 2 rate |
| 7205.29.00.00 | Powders: other | footnote on the column 2 rate |
| 7207.12.00 | Containing by weight less than 0.25 percent of carbon: other, of rectangular (other than square) cross section | footnote on the column 2 rate |
| 7208.10.30.00 | Of a thickness of 4.75 mm or more | footnote on the column 2 rate |
| 7208.10.60.00 | Of a thickness of less than 4.75 mm | footnote on the column 2 rate |
| 7208.25.30.00 | Of high-strength steel | footnote on the column 2 rate |
| 7208.36.00 | Of a thickness exceeding 10 mm | footnote on the column 2 rate |
| 7208.37.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | footnote on the column 2 rate |
| 7208.38.00 | Of a thickness of 3 mm or more but less than 4.75 mm | footnote on the column 2 rate |
| 7208.39.00 | Of a thickness of less than 3 mm | footnote on the column 2 rate |
| 7208.40.30 | Of a thickness of 4.75 mm or more | footnote on the column 2 rate |
| 7208.40.60 | Of a thickness of less than 4.75 mm | footnote on the column 2 rate |
| 7208.51.00 | Of a thickness exceeding 10 mm | footnote on the column 2 rate |
| 7208.52.00.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | footnote on the column 2 rate |
| 7208.53.00.00 | Of a thickness of 3 mm or more but less than 4.75 mm | footnote on the column 2 rate |
| 7208.54.00.00 | Of a thickness of less than 3 mm | footnote on the column 2 rate |
| 7208.90.00.00 | Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: other | footnote on the column 2 rate |
| 7209.16.00 | Of a thickness exceeding 1 mm but less than 3 mm | footnote on the column 2 rate |
| 7209.17.00 | Of a thickness of 0.5 mm or more but not exceeding 1 mm | footnote on the column 2 rate |
| 7209.18.60 | Of a thickness of less than 0.5 mm: other | footnote on the column 2 rate |
| 7210.41.00.00 | Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated: corrugated | footnote on the column 2 rate |
| 7210.49.00 | Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated: other | footnote on the column 2 rate |
| 7210.61.00.00 | Plated or coated with aluminum-zinc alloys | footnote on the column 2 rate |
| 7210.69.00.00 | Plated or coated with aluminum: other | footnote on the column 2 rate |
| 7210.70.60 | Painted, varnished or coated with plastics: other | footnote on the column 2 rate |
| 7212.40.10.00 | Of a width of less than 300 mm | footnote on the column 2 rate |
| 7212.40.50.00 | Painted, varnished or coated with plastics: other | footnote on the column 2 rate |
| 7213.10.00.00 | Concrete reinforcing bars and rods | footnote on the column 2 rate |
| 7214.20.00.00 | Concrete reinforcing bars and rods | footnote on the column 2 rate |
| 7214.99.00 | Other | footnote on the column 2 rate |
| 7216.69.00.00 | Angles, shapes and sections, not further worked than cold-formed or cold-finished: other | footnote on the column 2 rate |
| 7216.91.00 | Cold-formed or cold-finished from flat-rolled products | footnote on the column 2 rate |
| 7217.10.60.00 | Containing by weight less than 0.25 percent of carbon: other wire | footnote on the column 2 rate |
| 7217.10.90.00 | Not plated or coated, whether or not polished: other wire | footnote on the column 2 rate |
| 7217.20.30.00 | With a diameter of 1.5 mm or more and containing by weight less than 0.25 percent of carbon | footnote on the column 2 rate |
| 7222.30.00 | Other bars and rods | footnote on the column 2 rate |
| 7224.90.00 | Other | footnote on the column 2 rate |
| 7225.11.00.00 | Grain-oriented | footnote on the column 2 rate |
| 7225.19.00.00 | Of silicon electrical steel: other | footnote on the column 2 rate |
| 7226.11.10.00 | Of a width of 300 mm or more | footnote on the column 2 rate |
| 7226.11.90 | Of a width of less than 300 mm | footnote on the column 2 rate |
| 7226.19.90.00 | Of a width of less than 300 mm | footnote on the column 2 rate |
| 7228.40.00.00 | Other bars and rods, not further worked than forged | footnote on the column 2 rate |
| 7228.50.10 | Of tool steel (other than high-speed steel) | footnote on the column 2 rate |
| 7228.50.50 | Other | footnote on the column 2 rate |
| 7228.60.80.00 | Cold-formed | footnote on the column 2 rate |
| 7304.19.10 | Of iron or nonalloy steel | footnote on the column 2 rate |
| 7304.24.40 | Casing: other | footnote on the column 2 rate |
| 7304.29.10 | Threaded or coupled | footnote on the column 2 rate |
| 7304.29.20 | Of iron or nonalloy steel: other | footnote on the column 2 rate |
| 7304.29.31 | Threaded or coupled | footnote on the column 2 rate |
| 7304.29.41 | Of other alloy steel: other | footnote on the column 2 rate |
| 7304.29.50 | Of iron or nonalloy steel | footnote on the column 2 rate |
| 7304.31.60 | Cold-drawn or cold-rolled (cold-reduced): other | footnote on the column 2 rate |
| 7304.39.00 | Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel: other | footnote on the column 2 rate |
| 7305.11.10 | Of iron or nonalloy steel | footnote on the column 2 rate |
| 7305.12.10 | Of iron or nonalloy steel | footnote on the column 2 rate |
| 7306.29.20.00 | Of iron or nonalloy steel: other | footnote on the column 2 rate |
| 7306.29.60 | Of iron or nonalloy steel | footnote on the column 2 rate |
| 7306.30.50 | Having a wall thickness of 1.65 mm or more: other | footnote on the column 2 rate |
| 7307.99.10.00 | Of iron or nonalloy steel | footnote on the column 2 rate |
| 7308.90.30.00 | Not in part of alloy steel | footnote on the column 2 rate |
| 7308.90.60.00 | Columns, pillars, posts, beams, girders and similar structural units: other | footnote on the column 2 rate |
| 7310.10.00 | Of a capacity of 50 liters or more | footnote on the column 2 rate |
| 7310.29.00 | Of a capacity of less than 50 liters: other | footnote on the column 2 rate |
| 7311.00.00 | Containers for compressed or liquefied gas, of iron or steel | footnote on the column 2 rate |
| 7314.41.00 | Plated or coated with zinc | footnote on the column 2 rate |
| 7318.15.20 | Bolts and bolts and their nuts or washers entered or exported in the same shipment | footnote on the column 2 rate |
| 7318.15.40.00 | Machine screws 9.5 mm or more in length and 3.2 mm or more in diameter (not including cap screws) | footnote on the column 2 rate |
| 7318.16.00 | Threaded articles: nuts | footnote on the column 2 rate |
| 7318.22.00.00 | Non-threaded articles: other washers | footnote on the column 2 rate |
| 7325.10.00 | Of nonmalleable cast iron | footnote on the column 2 rate |
| 7403.11.00.00 | Cathodes and sections of cathodes | footnote on the column 2 rate |
| 7408.11.60.00 | With a maximum cross-sectional dimension over 6 mm but not over 9.5 mm | footnote on the column 2 rate |
| 7408.19.00 | Of refined copper: other | footnote on the column 2 rate |
| 7409.21.00 | Of copper-zinc base alloys (brass): in coils | footnote on the column 2 rate |
| 7410.22.00.00 | Of copper alloys | footnote on the column 2 rate |
| 7601.10.30.00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | footnote on the column 2 rate |
| 7601.10.60 | Aluminum, not alloyed: other | footnote on the column 2 rate |
| 7601.20.30.00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | footnote on the column 2 rate |
| 7601.20.60.00 | Containing 25 percent or more by weight of silicon | footnote on the column 2 rate |
| 7601.20.90 | Aluminum alloys: other | footnote on the column 2 rate |
| 7604.10.30.00 | Having a round cross section | footnote on the column 2 rate |
| 7604.10.50.00 | Bars and rods: other | footnote on the column 2 rate |
| 7604.21.00 | Hollow profiles | footnote on the column 2 rate |
| 7604.29.30 | Having a round cross section | footnote on the column 2 rate |
| 7604.29.50 | Bars and rods: other | footnote on the column 2 rate |
| 7605.11.00.00 | Of which the maximum cross-sectional dimension exceeds 7 mm | footnote on the column 2 rate |
| 7605.19.00.00 | Of aluminum, not alloyed: other | footnote on the column 2 rate |
| 7605.21.00.00 | Of which the maximum cross-sectional dimension exceeds 7 mm | footnote on the column 2 rate |
| 7605.29.00.00 | Of aluminum alloys: other | footnote on the column 2 rate |
| 7606.11.30 | Of aluminum, not alloyed: not clad | footnote on the column 2 rate |
| 7606.11.60.00 | Of aluminum, not alloyed: clad | footnote on the column 2 rate |
| 7606.12.30 | Of aluminum alloys: not clad | footnote on the column 2 rate |
| 7606.12.60.00 | Of aluminum alloys: clad | footnote on the column 2 rate |
| 7606.91.30 | Of aluminum, not alloyed: not clad | footnote on the column 2 rate |
| 7606.91.60 | Of aluminum, not alloyed: clad | footnote on the column 2 rate |
| 7606.92.30 | Of aluminum alloys: not clad | footnote on the column 2 rate |
| 7606.92.60 | Of aluminum alloys: clad | footnote on the column 2 rate |
| 7607.11.90 | Rolled but not further worked: other | footnote on the column 2 rate |
| 7607.19.60.00 | Not backed: other | footnote on the column 2 rate |
| 7607.20.10.00 | Covered or decorated with a character, design, fancy effect or pattern | footnote on the column 2 rate |
| 7607.20.50.00 | Backed: other | footnote on the column 2 rate |
| 7612.90.50.00 | Aluminum casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other... | footnote on the column 2 rate |
| 7613.00.00.00 | Aluminum containers for compressed or liquefied gas | footnote on the column 2 rate |
| 7801.10.00.00 | Unwrought lead: refined lead | footnote on the column 2 rate |
| 7801.99.90 | Unwrought lead: other | footnote on the column 2 rate |
| 8108.20.00 | Unwrought titanium; powders | footnote on the column 2 rate |
| 8108.30.00.00 | Waste and scrap | footnote on the column 2 rate |
| 8112.31.00.00 | Unwrought; waste and scrap; powders | footnote on the column 2 rate |
| 8112.41.10.00 | Waste and scrap | footnote on the column 2 rate |
| 8112.92.07.00 | Waste and scrap | footnote on the column 2 rate |
| 8112.92.10.00 | Unwrought; waste and scrap; powders: gallium | footnote on the column 2 rate |
| 8112.92.30.00 | Unwrought; waste and scrap; powders: indium | footnote on the column 2 rate |
| 8112.92.40.00 | Niobium (columbium) | footnote on the column 2 rate |
What this page leaves to your broker
This page quotes the schedule. It does not add the rates together, and it does not say whether a chapter 99 heading applies to a shipment: that turns on the country of origin, the dates and the U.S. notes to chapter 99. Section 301, Section 232 and other chapter 99 measures list the goods they cover in those notes and in Federal Register notices, so a line can be covered by a heading its footnotes never cite. A licensed customs broker makes the determination.
Built September 29, 2026 from HTS Revision 20 (2026) (USITC release 2026HTSRev20, published September 23, 2026, current since September 28, 2026). The schedule changes often; USITC's own site always has the current text.