Heading 7211: Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated
In chapter 72, Iron and steel. 17 rate lines, laid out as HTS Revision 20 (2026) prints them.
| HTS number | Description | Units | General | Special | Column 2 |
|---|---|---|---|---|---|
| 7211 | Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated: | ||||
| Not further worked than hot-rolled: | |||||
| 7211.13.00.00 | Universal mill plate | kg | Free | 20% | |
| 7211.14.00 | Other, of a thickness of 4.75 mm or more | Free | 20% | ||
| 7211.14.00.30 | Of high-strength steel | kg | |||
| Other: | |||||
| 7211.14.00.45 | Not in coils | kg | |||
| 7211.14.00.90 | Other | kg | |||
| 7211.19 | Other: | ||||
| Of a width of less than 300 mm: | |||||
| 7211.19.15.00 | Of high-strength steel | kg | Free | 25% | |
| Other: | |||||
| 7211.19.20.00 | Of a thickness exceeding 1.25 mm | kg | Free | 25% | |
| 7211.19.30.00 | Other | kg | Free | 25% | |
| Other: | |||||
| 7211.19.45.00 | Of high-strength steel | kg | Free | 20% | |
| Other: | |||||
| 7211.19.60.00 | Pickled | kg | Free | 0.4¢/kg + 20% | |
| 7211.19.75 | Other | Free | 20% | ||
| In coils: | |||||
| 7211.19.75.30 | With untrimmed edges | kg | |||
| 7211.19.75.60 | Other | kg | |||
| 7211.19.75.90 | Other | kg | |||
| Not further worked than cold-rolled (cold-reduced): | |||||
| 7211.23 | Containing by weight less than 0.25 percent of carbon: | ||||
| Of a width of less than 300 mm: | |||||
| Of a thickness exceeding 1.25 mm: | |||||
| 7211.23.15.00 | Of high-strength steel | kg | Free | 25% | |
| 7211.23.20.00 | Other | kg | Free | 25% | |
| 7211.23.30.00 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | kg | Free | 25% | |
| 7211.23.45.00 | Of a thickness not exceeding 0.25 mm | kg | Free | 25% | |
| 7211.23.60 | Other | Free | 0.4¢/kg + 20% | ||
| 7211.23.60.30 | Of a thickness exceeding 1.25 mm | kg | |||
| 7211.23.60.60 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | kg | |||
| 7211.23.60.90 | Of a thickness not exceeding 0.25 mm: | kg | |||
| 7211.29 | Other: | ||||
| Of a width of less than 300 mm: | |||||
| 7211.29.20 | Of a thickness exceeding 0.25 mm | Free | 25% | ||
| 7211.29.20.30 | Of a width less than 51 mm, in coils | kg | |||
| 7211.29.20.90 | Other | kg | |||
| 7211.29.45.00 | Other | kg | Free | 25% | |
| 7211.29.60 | Other | Free | 0.4¢/kg + 20% | ||
| 7211.29.60.30 | Of a thickness exceeding 1.25 mm | kg | |||
| 7211.29.60.80 | Other | kg | |||
| 7211.90.00.00 | Other | kg | Free | 20% |
Rates are quoted as printed. Each 8-digit number opens its own page with footnotes and cited chapter 99 headings.
Watch lines in heading 7211
Pick the 8 or 10 digit numbers you import and we email you the old and new text whenever a new HTS revision changes them.
See the alert plansNo line in this heading cites a chapter 99 heading in its footnotes or rate columns.
What this page leaves to your broker
This page quotes the schedule. It does not add the rates together, and it does not say whether a chapter 99 heading applies to a shipment: that turns on the country of origin, the dates and the U.S. notes to chapter 99. Section 301, Section 232 and other chapter 99 measures list the goods they cover in those notes and in Federal Register notices, so a line can be covered by a heading its footnotes never cite. A licensed customs broker makes the determination.
Built September 29, 2026 from HTS Revision 20 (2026) (USITC release 2026HTSRev20, published September 23, 2026, current since September 28, 2026). The schedule changes often; USITC's own site always has the current text.