Heading 7208: Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
In chapter 72, Iron and steel. 18 rate lines, laid out as HTS Revision 20 (2026) prints them.
| HTS number | Description | Units | General | Special | Column 2 |
|---|---|---|---|---|---|
| 7208 | Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated: | ||||
| 7208.10 | In coils, not further worked than hot-rolled, with patterns in relief: | ||||
| 7208.10.15.00 | Pickled | kg | Free | 0.4¢/kg + 20% | |
| Other: | |||||
| 7208.10.30.00 | Of a thickness of 4.75 mm or more | kg | Free | 20% | |
| 7208.10.60.00 | Of a thickness of less than 4.75 mm | kg | Free | 20% | |
| Other, in coils, not further worked than hot-rolled, pickled: | |||||
| 7208.25 | Of a thickness of 4.75 mm or more: | ||||
| 7208.25.30.00 | Of high-strength steel | kg | Free | 20% | |
| 7208.25.60.00 | Other | kg | Free | 0.4¢/kg + 20% | |
| 7208.26.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | 0.4¢/kg + 20% | ||
| 7208.26.00.30 | High-strength steel | kg | |||
| 7208.26.00.60 | Other | kg | |||
| 7208.27.00 | Of a thickness of less than 3 mm | Free | 0.4¢/kg + 20% | ||
| High-strength steel: | |||||
| 7208.27.00.40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | kg | |||
| 7208.27.00.45 | Other | kg | |||
| 7208.27.00.60 | Other | kg | |||
| Other, in coils, not further worked than hot-rolled: | |||||
| 7208.36.00 | Of a thickness exceeding 10 mm | Free | 20% | ||
| 7208.36.00.30 | High-strength steel | kg | |||
| 7208.36.00.60 | Other | kg | |||
| 7208.37.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free | 20% | ||
| 7208.37.00.30 | High-strength steel | kg | |||
| 7208.37.00.60 | Other | kg | |||
| 7208.38.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | 20% | ||
| 7208.38.00.15 | High-strength steel | kg | |||
| Other: | |||||
| 7208.38.00.30 | With untrimmed edges | kg | |||
| 7208.38.00.90 | Other | kg | |||
| 7208.39.00 | Of a thickness of less than 3 mm | Free | 20% | ||
| High-strength steel: | |||||
| 7208.39.00.20 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | kg | |||
| 7208.39.00.25 | Other | kg | |||
| Other: | |||||
| 7208.39.00.30 | With untrimmed edges | kg | |||
| 7208.39.00.90 | Other | kg | |||
| 7208.40 | Not in coils, not further worked than hot-rolled, with patterns in relief: | ||||
| 7208.40.30 | Of a thickness of 4.75 mm or more | Free | 20% | ||
| 7208.40.30.30 | Of a thickness exceeding 10 mm | kg | |||
| 7208.40.30.60 | Other | kg | |||
| 7208.40.60 | Of a thickness of less than 4.75 mm | Free | 20% | ||
| 7208.40.60.30 | Of a thickness less than 3 mm | kg | |||
| 7208.40.60.60 | Other | kg | |||
| Other, not in coils, not further worked than hot-rolled: | |||||
| 7208.51.00 | Of a thickness exceeding 10 mm | Free | 20% | ||
| 7208.51.00.30 | Universal mill plate | kg | |||
| Other: | |||||
| 7208.51.00.45 | Of high-strength steel | kg | |||
| 7208.51.00.60 | Other | kg | |||
| 7208.52.00.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | kg | Free | 20% | |
| 7208.53.00.00 | Of a thickness of 3 mm or more but less than 4.75 mm | kg | Free | 20% | |
| 7208.54.00.00 | Of a thickness of less than 3 mm | kg | Free | 20% | |
| 7208.90.00.00 | Other | kg | Free | 20% |
Rates are quoted as printed. Each 8-digit number opens its own page with footnotes and cited chapter 99 headings.
Watch lines in heading 7208
Pick the 8 or 10 digit numbers you import and we email you the old and new text whenever a new HTS revision changes them.
See the alert plansChapter 99 headings cited in this heading
- 9903.90.09 cited by 14 lines
What this page leaves to your broker
This page quotes the schedule. It does not add the rates together, and it does not say whether a chapter 99 heading applies to a shipment: that turns on the country of origin, the dates and the U.S. notes to chapter 99. Section 301, Section 232 and other chapter 99 measures list the goods they cover in those notes and in Federal Register notices, so a line can be covered by a heading its footnotes never cite. A licensed customs broker makes the determination.
Built September 29, 2026 from HTS Revision 20 (2026) (USITC release 2026HTSRev20, published September 23, 2026, current since September 28, 2026). The schedule changes often; USITC's own site always has the current text.