Heading 7226: Flat-rolled products of other alloy steel, of a width of less than 600 mm
In chapter 72, Iron and steel. 17 rate lines, laid out as HTS Revision 20 (2026) prints them.
| HTS number | Description | Units | General | Special | Column 2 |
|---|---|---|---|---|---|
| 7226 | Flat-rolled products of other alloy steel, of a width of less than 600 mm: | ||||
| Of silicon electrical steel: | |||||
| 7226.11 | Grain-oriented: | ||||
| 7226.11.10.00 | Of a width of 300 mm or more | kg | Free | 28% | |
| 7226.11.90 | Of a width of less than 300 mm | Free | 33% | ||
| 7226.11.90.30 | Of thickness not exceeding 0.25 mm | kg | |||
| 7226.11.90.60 | Other | kg | |||
| 7226.19 | Other: | ||||
| 7226.19.10.00 | Of a width of 300 mm or more | kg | Free | 28% | |
| 7226.19.90.00 | Of a width of less than 300 mm | kg | Free | 33% | |
| 7226.20.00.00 | Of high-speed steel | kg | Free | 37% | |
| Other: | |||||
| 7226.91 | Not further worked than hot-rolled: | ||||
| Of tool steel (other than high-speed steel): | |||||
| 7226.91.05.00 | Of chipper knife steel | kg | Free | 34% | |
| Other: | |||||
| 7226.91.15 | Of a width of 300 mm or more | Free | 29% | ||
| 7226.91.15.30 | Of ball-bearing steel | kg | |||
| 7226.91.15.60 | Other | kg | |||
| 7226.91.25 | Of a width of less than 300 mm | Free | 34% | ||
| 7226.91.25.30 | Of ball-bearing steel | kg | |||
| 7226.91.25.60 | Other | kg | |||
| Other: | |||||
| 7226.91.50.00 | Of a thickness of 4.75 mm or more | kg | Free | 28% | |
| Of a thickness of less than 4.75 mm: | |||||
| 7226.91.70.00 | Of a width of 300 mm or more | kg | Free | 28% | |
| 7226.91.80.00 | Of a width of less than 300 mm | kg | Free | 33% | |
| 7226.92 | Not further worked than cold-rolled (cold-reduced): | ||||
| Of tool steel (other than high-speed steel): | |||||
| 7226.92.10 | Of a width of 300 mm or more | Free | 0.4¢/kg + 29% | ||
| 7226.92.10.30 | Of ball-bearing steel | kg | |||
| 7226.92.10.60 | Other | kg | |||
| 7226.92.30 | Of a width of less than 300 mm | Free | 34% | ||
| 7226.92.30.30 | Of ball-bearing steel | kg | |||
| 7226.92.30.60 | Other | kg | |||
| Other: | |||||
| 7226.92.50.00 | Of a width of 300 mm or more | kg | Free | 0.4¢/kg + 28% | |
| Of a width of less than 300 mm: | |||||
| 7226.92.70 | Of a thickness not exceeding 0.25 mm | Free | 33% | ||
| 7226.92.70.05 | Of high-nickel alloy steel | kg | |||
| 7226.92.70.50 | Other | kg | |||
| 7226.92.80 | Of a thickness exceeding 0.25 mm | Free | 33% | ||
| 7226.92.80.05 | Of high-nickel alloy steel | kg | |||
| 7226.92.80.50 | Other | kg | |||
| 7226.99.01 | Other | Free | 33% | ||
| 7226.99.01.10 | Electrolytically plated or coated with zinc | kg | |||
| 7226.99.01.30 | Otherwise plated or coated with zinc | kg | |||
| 7226.99.01.80 | Other | kg |
Rates are quoted as printed. Each 8-digit number opens its own page with footnotes and cited chapter 99 headings.
Watch lines in heading 7226
Pick the 8 or 10 digit numbers you import and we email you the old and new text whenever a new HTS revision changes them.
See the alert plansChapter 99 headings cited in this heading
- 9903.90.09 cited by 3 lines
What this page leaves to your broker
This page quotes the schedule. It does not add the rates together, and it does not say whether a chapter 99 heading applies to a shipment: that turns on the country of origin, the dates and the U.S. notes to chapter 99. Section 301, Section 232 and other chapter 99 measures list the goods they cover in those notes and in Federal Register notices, so a line can be covered by a heading its footnotes never cite. A licensed customs broker makes the determination.
Built September 29, 2026 from HTS Revision 20 (2026) (USITC release 2026HTSRev20, published September 23, 2026, current since September 28, 2026). The schedule changes often; USITC's own site always has the current text.