Heading 7228: Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel
In chapter 72, Iron and steel. 16 rate lines, laid out as HTS Revision 20 (2026) prints them.
| HTS number | Description | Units | General | Special | Column 2 |
|---|---|---|---|---|---|
| 7228 | Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel: | ||||
| 7228.10.00 | Bars and rods, of high-speed steel | Free | 32% | ||
| 7228.10.00.10 | Not cold-formed | kg | |||
| Cold-formed: | |||||
| 7228.10.00.30 | With a maximum cross-sectional dimension of less than 18 mm | kg | |||
| 7228.10.00.60 | With a maximum cross-sectional dimension of 18 mm or more | kg | |||
| 7228.20 | Bars and rods, of silico-manganese steel: | ||||
| 7228.20.10.00 | Not cold-formed | kg | Free | 28% | |
| 7228.20.50.00 | Cold-formed | kg | Free | 28% | |
| Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: | |||||
| 7228.30 | Of tool steel (other than high-speed steel): | ||||
| 7228.30.20.00 | Of ball-bearing steel | kg | Free | 29% | |
| 7228.30.40.00 | Of chipper knife steel, not cold-formed | kg | Free | 28% | |
| 7228.30.60.00 | Other | kg | Free | 29% | |
| 7228.30.80 | Other | Free | 28% | ||
| 7228.30.80.05 | Of high-nickel alloy steel | kg | |||
| 7228.30.80.10 | Concrete reinforcing bars and rods | kg | |||
| Other: | |||||
| 7228.30.80.15 | With a diameter or cross section measuring less than 76 mm | kg | |||
| 7228.30.80.41 | With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm | kg | |||
| 7228.30.80.45 | With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm | kg | |||
| 7228.30.80.70 | With a diameter or cross section exceeding 228 mm | kg | |||
| 7228.40.00.00 | Other bars and rods, not further worked than forged | kg | Free | 28% | |
| 7228.50 | Other bars and rods, not further worked than cold-formed or cold-finished: | ||||
| 7228.50.10 | Of tool steel (other than high-speed steel) | Free | 29% | ||
| 7228.50.10.10 | Of ball-bearing steel | kg | |||
| Other: | |||||
| With a maximum cross-sectional dimension of less than 18 mm: | |||||
| 7228.50.10.20 | Of round or rectangular cross section with surfaces ground, milled or polished | kg | |||
| 7228.50.10.40 | Other | kg | |||
| With a maximum cross-sectional dimension of 18 mm or more: | |||||
| 7228.50.10.60 | Of round or rectangular cross section with surfaces ground, milled or polished | kg | |||
| 7228.50.10.80 | Other | kg | |||
| 7228.50.50 | Other | Free | 28% | ||
| 7228.50.50.05 | Of high-nickel alloy steel | kg | |||
| Other: | |||||
| 7228.50.50.15 | With a diameter or cross section measuring less than 76 mm | kg | |||
| 7228.50.50.40 | With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm | kg | |||
| 7228.50.50.70 | With a diameter or cross section exceeding 228 mm | kg | |||
| 7228.60 | Other bars and rods: | ||||
| 7228.60.10 | Of tool steel (other than high-speed steel) | Free | 29% | ||
| 7228.60.10.30 | Of ball-bearing steel | kg | |||
| 7228.60.10.60 | Other | kg | |||
| Other: | |||||
| 7228.60.60.00 | Not cold-formed | kg | Free | 28% | |
| 7228.60.80.00 | Cold-formed | kg | Free | 28% | |
| 7228.70 | Angles, shapes and sections: | ||||
| 7228.70.30 | Hot-rolled, not drilled, not punched and not otherwise advanced | Free | 10% | ||
| 7228.70.30.10 | U, I, H and T sections | kg | |||
| Other: | |||||
| With a maximum cross-sectional dimension of 76 mm or more: | |||||
| 7228.70.30.20 | Angles | kg | |||
| 7228.70.30.41 | Other | kg | |||
| With a maximum cross-sectional dimension of less than 76 mm: | |||||
| 7228.70.30.60 | Angles | kg | |||
| 7228.70.30.81 | Other | kg | |||
| 7228.70.60.00 | Other | kg | Free | 28% | |
| 7228.80.00.00 | Hollow drill bars and rods | kg | Free | 30% |
Rates are quoted as printed. Each 8-digit number opens its own page with footnotes and cited chapter 99 headings.
Watch lines in heading 7228
Pick the 8 or 10 digit numbers you import and we email you the old and new text whenever a new HTS revision changes them.
See the alert plansChapter 99 headings cited in this heading
- 9903.90.09 cited by 4 lines
What this page leaves to your broker
This page quotes the schedule. It does not add the rates together, and it does not say whether a chapter 99 heading applies to a shipment: that turns on the country of origin, the dates and the U.S. notes to chapter 99. Section 301, Section 232 and other chapter 99 measures list the goods they cover in those notes and in Federal Register notices, so a line can be covered by a heading its footnotes never cite. A licensed customs broker makes the determination.
Built September 29, 2026 from HTS Revision 20 (2026) (USITC release 2026HTSRev20, published September 23, 2026, current since September 28, 2026). The schedule changes often; USITC's own site always has the current text.