Heading 7304: Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel

In chapter 73, Articles of iron or steel. 31 rate lines, laid out as HTS Revision 20 (2026) prints them.

HTS number	Description	Units	General	Column 2
7304	Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel:
	Line pipe of a kind used for oil or gas pipelines:
7304.11.00	Of stainless steel		Free	35%
7304.11.00.20	Having an outside diameter not exceeding 114.3 mm	kg
7304.11.00.50	Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm	kg
7304.11.00.80	Having an outside diameter exceeding 406.4 mm	kg
7304.19	Other:
7304.19.10	Of iron or nonalloy steel		Free	25%
7304.19.10.20	Having an outside diameter not exceeding 114.3 mm	kg
7304.19.10.30	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	kg
	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm:
7304.19.10.45	Having a wall thickness less than 12.7 mm	kg
7304.19.10.60	Having a wall thickness of 12.7 mm or more	kg
7304.19.10.80	Having an outside diameter exceeding 406.4 mm	kg
7304.19.50	Of other alloy steel		Free	35%
7304.19.50.20	Having an outside diameter not exceeding 114.3 mm	kg
7304.19.50.50	Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mm	kg
7304.19.50.80	Having an outside diameter exceeding 406.4 mm	kg
	Casing, tubing and drill pipe, of a kind used in drilling for oil or gas:
7304.22.00	Drill pipe of stainless steel		Free	35%
	Having an outside diameter not exceeding 168.3 mm:
7304.22.00.30	Having a wall thickness not exceeding 9.5 mm	kg
7304.22.00.45	Having a wall thickness exceeding 9.5 mm	kg
7304.22.00.60	Having an outside diameter exceeding 168.3 mm	kg
7304.23	Other drill pipe:
7304.23.30.00	Of iron or nonalloy steel	kg	Free	25%
7304.23.60	Of alloy steel		Free	35%
	Having an outside diameter not exceeding 168.3 mm:
7304.23.60.30	Having a wall thickness not exceeding 9.5 mm	kg
7304.23.60.45	Having a wall thickness exceeding 9.5 mm	kg
7304.23.60.60	Having an outside diameter exceeding 168.3 mm	kg
7304.24	Other, of stainless steel:
	Casing:
7304.24.30	Threaded or coupled		Free	28%
	Having an outside diameter less than 215.9 mm:
7304.24.30.10	Having a wall thickness less than 12.7 mm	kg
7304.24.30.20	Having a wall thickness of 12.7 mm or more	kg
	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.24.30.30	Having a wall thickness less than 12.7 mm	kg
7304.24.30.40	Having a wall thickness of 12.7 mm or more	kg
7304.24.30.45	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm	kg
7304.24.30.80	Having an outside diameter exceeding 406.4 mm	kg
7304.24.40	Other		Free	8.5%
	Having an outside diameter less than 215.9 mm:
7304.24.40.10	Having a wall thickness less than 12.7 mm	kg
7304.24.40.20	Having a wall thickness of 12.7 mm or more	kg
	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.24.40.30	Having a wall thickness less than 12.7 mm	kg
7304.24.40.40	Having a wall thickness of 12.7 mm or more	kg
	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.24.40.50	Having a wall thickness less than 12.7 mm	kg
7304.24.40.60	Having a wall thickness of 12.7 mm or more	kg
7304.24.40.80	Having an outside diameter exceeding 406.4 mm	kg
7304.24.60	Tubing		Free	35%
	Having an outside diameter not exceeding 114.3 mm:
7304.24.60.15	Having a wall thickness not exceeding 9.5 mm	kg
7304.24.60.30	Having a wall thickness exceeding 9.5 mm	kg
7304.24.60.45	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	kg
7304.24.60.60	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm	kg
7304.24.60.75	Having an outside diameter exceeding 406.4 mm	kg
7304.29	Other:
	Casing:
	Of iron or nonalloy steel:
7304.29.10	Threaded or coupled		Free	20%
	Having an outside diameter less than 215.9 mm:
7304.29.10.10	Having a wall thickness less than 12.7 mm	kg
7304.29.10.20	Having a wall thickness of 12.7 mm or more	kg
	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.29.10.30	Having a wall thickness less than 12.7 mm	kg
7304.29.10.40	Having a wall thickness of 12.7 mm or more	kg
	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.29.10.50	Having a wall thickness less than 12.7 mm	kg
7304.29.10.60	Having a wall thickness of 12.7 mm or more	kg
7304.29.10.80	Having an outside diameter exceeding 406.4 mm	kg
7304.29.20	Other		Free	1%
	Having an outside diameter less than 215.9 mm:
7304.29.20.10	Having a wall thickness less than 12.7 mm	kg
7304.29.20.20	Having a wall thickness of 12.7 mm or more	kg
	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.29.20.30	Having a wall thickness less than 12.7 mm	kg
7304.29.20.40	Having a wall thickness of 12.7 mm or more	kg
	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.29.20.50	Having a wall thickness less than 12.7 mm	kg
7304.29.20.60	Having a wall thickness of 12.7 mm or more	kg
7304.29.20.80	Having an outside diameter exceeding 406.4 mm	kg
	Of other alloy steel:
7304.29.31	Threaded or coupled		Free	28%
	Having an outside diameter less than 215.9 mm:
7304.29.31.10	Having a wall thickness less than 12.7 mm	kg
7304.29.31.20	Having a wall thickness of 12.7 mm or more	kg
	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.29.31.30	Having a wall thickness less than 12.7 mm	kg
7304.29.31.40	Having a wall thickness of 12.7 mm or more	kg
	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.29.31.50	Having a wall thickness less than 12.7 mm	kg
7304.29.31.60	Having a wall thickness of 12.7 mm or more	kg
7304.29.31.80	Having an outside diameter exceeding 406.4 mm	kg
7304.29.41	Other		Free	8.5%
	Having an outside diameter less than 215.9 mm:
7304.29.41.10	Having a wall thickness less than 12.7 mm	kg
7304.29.41.20	Having a wall thickness of 12.7 mm or more	kg
	Having an outside diameter of 215.9 mm or more but not exceeding 285.8 mm:
7304.29.41.30	Having a wall thickness less than 12.7 mm	kg
7304.29.41.40	Having a wall thickness of 12.7 mm or more	kg
	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.29.41.50	Having a wall thickness less than 12.7 mm	kg
7304.29.41.60	Having a wall thickness of 12.7 mm or more	kg
7304.29.41.80	Having an outside diameter exceeding 406.4 mm	kg
	Tubing:
7304.29.50	Of iron or nonalloy steel		Free	25%
	Having an outside diameter not exceeding 114.3 mm:
7304.29.50.15	Having a wall thickness not exceeding 9.5 mm	kg
7304.29.50.30	Having a wall thickness exceeding 9.5 mm	kg
7304.29.50.45	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	kg
7304.29.50.60	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm	kg
7304.29.50.75	Having an outside diameter exceeding 406.4 mm	kg
7304.29.61	Of other alloy steel		Free	35%
	Having an outside diameter not exceeding 114.3 mm:
7304.29.61.15	Having a wall thickness not exceeding 9.5 mm	kg
7304.29.61.30	Having a wall thickness exceeding 9.5 mm	kg
7304.29.61.45	Having an outside diameter exceeding 114.3 mm but less than 215.9 mm	kg
7304.29.61.60	Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mm	kg
7304.29.61.75	Having an outside diameter exceeding 406.4 mm	kg
	Other, of circular cross section, of iron or nonalloy steel:
7304.31	Cold-drawn or cold-rolled (cold-reduced):
7304.31.30.00	Hollow bars	kg	Free	22%
7304.31.60	Other		Free	25%
7304.31.60.10	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	kg
7304.31.60.50	Other	kg
7304.39.00	Other		Free	25%
	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters:
7304.39.00.02	Having an outside diameter less than 38.1 mm	kg
7304.39.00.04	Having an outside diameter of 38.1 mm or more but less than 190.5 mm	kg
7304.39.00.06	Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm	kg
7304.39.00.08	Having an outside diameter exceeding 285.8 mm	kg
	Other:
7304.39.00.16	Galvanized, having an outside diameter not exceeding 114.3 mm	kg
	Other:
7304.39.00.20	Having an outside diameter less than 38.1 mm	kg
	Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm:
7304.39.00.24	Having a wall thickness less than 6.4 mm	kg
7304.39.00.28	Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm	kg
7304.39.00.32	Having a wall thickness exceeding 12.7 mm	kg
	Having an outside diameter exceeding 114.3 mm but less than 190.5 mm:
7304.39.00.36	Having a wall thickness less than 12.7 mm	kg
7304.39.00.40	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
7304.39.00.44	Having a wall thickness of 19 mm or more	kg
	Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm:
7304.39.00.48	Having a wall thickness less than 12.7 mm	kg
7304.39.00.52	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
7304.39.00.56	Having a wall thickness of 19 mm or more	kg
	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.39.00.62	Having a wall thickness less than 12.7 mm	kg
7304.39.00.68	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
7304.39.00.72	Having a wall thickness of 19 mm or more	kg
	Having an outside diameter exceeding 406.4 mm:
7304.39.00.76	Having a wall thickness less than 19 mm	kg
7304.39.00.80	Having a wall thickness of 19 mm or more	kg
	Other, of circular cross section, of stainless steel:
7304.41	Cold-drawn or cold-rolled (cold-reduced):
7304.41.30	Of an external diameter of less than 19 mm		Free	36%
7304.41.30.05	Of high-nickel alloy steel	kg
	Other:
7304.41.30.15	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	kg
7304.41.30.45	Other	kg
7304.41.60	Other		Free	36%
7304.41.60.05	Of high-nickel alloy steel	kg
	Other:
7304.41.60.15	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	kg
7304.41.60.45	Other	kg
7304.49.00	Other		Free	36%
7304.49.00.05	Of high-nickel alloy steel	kg
	Other:
7304.49.00.15	Hollow bars	kg
	Other:
7304.49.00.45	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters	kg
7304.49.00.60	Other	kg
	Other, of circular cross section, of other alloy steel:
7304.51	Cold-drawn or cold-rolled (cold-reduced):
7304.51.10.00	Suitable for use in the manufacture of ball or roller bearings	kg	Free	34%
7304.51.50	Other		Free	35%
7304.51.50.05	Of high-nickel alloy steel	kg
	Other:
	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters:
7304.51.50.15	Of heat-resisting steel	kg
7304.51.50.45	Other	kg
7304.51.50.60	Other	kg
7304.59	Other:
7304.59.10.00	Suitable for use in the manufacture of ball or roller bearings	kg	Free	34%
	Other:
7304.59.20	Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters		Free	35%
7304.59.20.30	Of heat-resisting steel	kg
	Other:
7304.59.20.40	Having an outside diameter less than 38.1 mm	kg
7304.59.20.45	Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm	kg
7304.59.20.55	Having an outside diameter exceeding 114.3 mm but less than 190.5 mm	kg
7304.59.20.60	Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm	kg
7304.59.20.70	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm	kg
7304.59.20.80	Having an outside diameter exceeding 406.4 mm	kg
	Other:
7304.59.60.00	Of heat-resisting steel	kg	Free	36%
7304.59.80	Other		Free	35%
7304.59.80.10	Having an outside diameter less than 38.1 mm	kg
	Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mm:
7304.59.80.15	Having a wall thickness less than 6.4 mm	kg
7304.59.80.20	Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mm	kg
7304.59.80.25	Having a wall thickness exceeding 12.7 mm	kg
	Having an outside diameter exceeding 114.3 mm but less than 190.5 mm:
7304.59.80.30	Having a wall thickness less than 12.7 mm	kg
7304.59.80.35	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
7304.59.80.40	Having a wall thickness of 19 mm or more	kg
	Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mm:
7304.59.80.45	Having a wall thickness less than 12.7 mm	kg
7304.59.80.50	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
7304.59.80.55	Having a wall thickness of 19 mm or more	kg
	Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mm:
7304.59.80.60	Having a wall thickness less than 12.7 mm	kg
7304.59.80.65	Having a wall thickness of 12.7 mm or more but less than 19 mm	kg
7304.59.80.70	Having a wall thickness of 19 mm or more	kg
7304.59.80.80	Having an outside diameter exceeding 406.4 mm	kg
7304.90	Other:
	Having a wall thickness of 4 mm or more:
7304.90.10.00	Of iron or nonalloy steel	kg	Free	1%
7304.90.30.00	Of alloy steel	kg	Free	8.5%
	Having a wall thickness of less than 4 mm:
7304.90.50.00	Of iron or nonalloy steel	kg	Free	25%
7304.90.70.00	Of alloy steel	kg	Free	35%

Rates are quoted as printed. Each 8-digit number opens its own page with footnotes and cited chapter 99 headings.

Watch lines in heading 7304

Pick the 8 or 10 digit numbers you import and we email you the old and new text whenever a new HTS revision changes them.

See the alert plans

Chapter 99 headings cited in this heading

9903.90.09 cited by 9 lines

What this page leaves to your broker

This page quotes the schedule. It does not add the rates together, and it does not say whether a chapter 99 heading applies to a shipment: that turns on the country of origin, the dates and the U.S. notes to chapter 99. Section 301, Section 232 and other chapter 99 measures list the goods they cover in those notes and in Federal Register notices, so a line can be covered by a heading its footnotes never cite. A licensed customs broker makes the determination.

Built September 29, 2026 from HTS Revision 20 (2026) (USITC release 2026HTSRev20, published September 23, 2026, current since September 28, 2026). The schedule changes often; USITC's own site always has the current text.